birm iron removal media


Birm Water Filtration System (Iron & Manganese Removal)

Birm is an efficient media to remove dissolved iron and manganese compounds from raw water supplies. It acts as an insoluble catalyst to enhance the reaction between dissolved oxygen and …

Get More

Birm - for Iron Removal - 1 CUBIC FOOT

Birm is used to remove dissolved iron and manganese. The Ph must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies.

Get More

Birm Filter :: Birm

The physical characteristics of Birm® provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm® is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many …

Get More

Katalox Light Iron Removal Media

Katalox Light is a remarkable new iron removal media from Watch Water in Germany. It outperforms most iron/managense removal media, and is both economical and light weight (which reduces backwash water volume and flow rate considerably). It can also be used to remove other contaminants include hydrogen sulfide. Available in 1/2 cubic foot and 1 cubic foot bags and bulk quantities.

Get More

Birm Iron Filter Media - Pro Water Direct

The physical characteristics of Birm provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm is not consumed in the iron removal operation. It offers a tremendous economic advantage over many other iron removal methods. Other …

Get More

: Birm Filter Media for iron removal 1 cu. ft ...

Just some of the advantages of Birm Media include: --long material life with relatively low attrition loss --a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Birm does not require chemicals for regeneration, only periodic backwashing is …

Get More

About Birm Iron Filters - Residential Well Water Treatment ...

In plain English, as water containing iron flows through the media, if there is enough oxygen in the water, the Birm causes the iron to form rust, or solid iron particles. After these rust particles get trapped in the filter media, once or twice a week they are automatically backwashed out to drain, and the filter media is ready to filter again. Q.

Get More

Birm® IRON FILTER - Pacific Water Technology

Birm® is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. If the removal of Manganese is also required, we recommend the use of Manganese Greensand, as Birm requires a pH of above 8.

Get More

Zeo Prep Filtration Media | Charger Water Treatment Products

BIRM - A lightweight, catalytic filter media used for removing iron and manganese via oxidation. The oxidized iron or manganese is then filtered. Birm has an inert core coated with manganese dioxide. MANGANESE GREENSAND - A glutonite greensand that is a catalytic material for the removal of iron, manganese and hydrogen sulfide.

Get More

Resin and Media Filtration | Absolute Process Technologies

BIRM Iron Removal Media. Birm® is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm® acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds.

Get More

BIRM Iron Removal Media | Durbanville | Gumtree ...

Birm Filter Media for Iron Removal Birm is a granular water filter media widely used for the removal of iron and manganese from feed water supplies. Birm is an efficient and economical filter media used in the reduction of dissolved iron and manganese ions from raw water supplies such as ground water and industrial use water.

Get More

Replacement Parts, Resin, & Media - Media & Resin - Iron ...

KL Media - 1 cu ft. MSRP: Sale Price: $219.00. Standard Price: 1/2 cubic foot of KL media for iron, hydrogen sulfide, and manganese Product Features 1 cubic foot KL Media For removal of iron and manganese Removes up to 10 ppm iron Causes red/orange staining with levels as low as 0.3 ppm.

Get More

Birm Media – Iron Removal Media | ACURO ORGANICS LIMITED

May 13, 2016· Role of Birm Media in iron removal from water. Birm Media is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw supplies. Birm Media acts as an insoluble catalysts to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in ...

Get More

Iron Removal Media - Birm Media Manufacturer from Chennai

Birm is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds.

Get More

BIRM - Iron Removal Media (28.3 ltrs) - ROeStore

Jan 22, 2021· Birm is an efficient and economical method of removing iron and manganese compounds from raw water supplies. It may be used in either gravity fed …

Get More

Birm - Lenntech

removal or may break down or coat Birm® media. Chlorination greatly reduces Birm®'s activity. High concentrations of chlorine compounds may deplete the catalytic coating. Polyphosphates are known to coat Birm® and reduce Birm®'s ability to remove iron or manganese. Before adding any chemical to the influent or backwash water, the ...

Get More

Birm Media Iron Filtration: About Birm Iron Filters ...

The media does require a backwash in order to remove the oxidized ferric iron and any other debris. You can buy birm media from Aquapura since we are a Clack Birm Media supplier. How does Aquapura Use Birm Media. We use Birm media in our Iron Filter Air Injection systems such as the Purifiner PDAF-1054 Iron Filter .

Get More

Birm® Media Iron Removal Filtration Vessels (including ...

Birm® Media Iron Removal Filtration Vessels (including Media) Shipping calculated at checkout. Birm® is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm® acts as an insoluble catalyst to ...

Get More

Birm - Iron removal media-23A8006 - Softener Parts

One Cubic Foot Bag. Birm is used to remove dissolved iron and manganese. The pH must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. ALSO INSTRUCTIONS - Replacing MEDIA ( Carbon, Greensand, Birm, Calcite, etc ), see: Other MEDIA replacement ...

Get More

water - Catalytic Carbon or Birm for iron removal - Home ...

```Birm Birm is a medium specially prepared for iron removal. It has the ability to oxidize iron, and can remove small amounts of iron without pre-treatment, but it works best following aeration. It is also effective at manganese removal. The pH must be 6.8 or above for birm to work properly. Note: Birm should not be used on chlorinated systems.```

Get More

Birm Iron Removal Filter Media (18KG) - Water Purification ...

Birm iron and manganese removal water filter media acts as an insoluble catalyst that enhances the reaction between dissolved oxygen (D.O.) and the iron (Fe) compounds. In borehole water the dissolved iron is normally found in its ferrous bicarbonate form due to an excess of free carbon dioxide and is not easily filtered from water.

Get More

Iron Removal Media - APS Water

Iron Removal Media In this section you will find filtration media that is useful in the reduction or removal of dissolved iron in water. This includes manganese Greensand Clack MTM Birm Pyrolox and our special Multi-Blended media's.

Get More

Remove iron from well water using a Birm Filter. Removes ...

Birm may also be used for manganese reduction with the same dependability as iron removal. But in these applications, the water to be treated should have a pH of 8.0-9.0 for best results. And remember that this is true for ALL Birm Filters regardless of who makes them.

Get More